![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
billroperI've had the new Harry Potter pinball machine for a week now. Earlier today, the Death Eater drop target malfunctioned, which is not good. It went down and wouldn't come back up and stay up.
I poked around a bit on line. Then I opened up the machine, removed the glass, stood the playfield on end, and spent some time inspecting the problem. Eventually, I concluded that the screw at the bottom of the associated coil was loose, so I tightened it up. Then I put everything back together.
Things seem to be working correctly now. And I am thankful that this was a simple repair. This is a *complex* machine!
I poked around a bit on line. Then I opened up the machine, removed the glass, stood the playfield on end, and spent some time inspecting the problem. Eventually, I concluded that the screw at the bottom of the associated coil was loose, so I tightened it up. Then I put everything back together.
Things seem to be working correctly now. And I am thankful that this was a simple repair. This is a *complex* machine!